www.element14.com www.farnell.com www.newark.com page <1> v1.0 12/12/12 microswitch spdt, lever specifcations: rating : 10a, 125/250v ac : 10(2)a, 125/250v ac (nemko/enec/cqc) : 25t130 50e3 maximum contact resistance : 500m insulation resistance : >100m 500v dc withstand voltage : 1,000v ac for 1 minute operating frequency : mechanical 60 operations/minute : electrical 6 to 12 operation/minute ambient temperature : -25c to +85c ambient humidity : 85%rh mechanical life : 1,000,000 cycles electrical life (at rate load) : 50,000 cycles contact confguration : spdt microswitch type : snap action actuator style : lever switch operation : off-on switch terminals : quick connect, solder external depth : 9.7mm external width : 27.8mm height : 15.8mm operating force : 0.98n pre-travel : 3.2mm series : m141t01 switch case : pbt (polybutylene terephthalate)
www.element14.com www.farnell.com www.newark.com page <2> v1.0 12/12/12 microswitch spdt, lever description operating force (gf) op (mm) max. fp (mm) part number a b c d microswitch, spdt, 10a, lever 40 170 15.3 1.8 19 M141T02-AC0303D important notice : this data sheet and its contents (the information) belong to the members of the premier farnell group of companies (the group) or are licensed to it. no licence is granted for the use of it other than for information purposes in connection with the products to which it relates. no licence of any intellectual property rights is granted. the information is subject to change without notice and replaces all data sheets previously supplied. the information supplied is believed to be accurate but the group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. users of this data sheet should check for themselves the information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. liability for loss or damage resulting from any reliance on the information or use of it (including liability resulting from negligence or where the group was aware of the possibility of such loss or damage arising) is excluded. this will not operate to limit or restrict the groups liability for death or personal injury resulting from its negligence. multicomp is the registered trademark of the group. ? premier farnell plc 2012. part number table dimensions: millimetres note: tolerances unless otherwise specifed: 0.016/0.4 inches/mm
|
